Cho thuê máy đo độ rung Card Vibro Neo VM-2004Neo

(Click vào để xem ảnh lớn)

Cho thuê máy đo độ rung Card Vibro Neo VM-2004Neo

Giá: Liên hệ Lượt xem: 0 Hàng mới

Máy đo độ rung có độ chính xác cao của hãng IMV CORPORATION - Card Vibro Neo VM-2004Neo

Chi tiết sản phẩm

For condition check of general rotation machines, such as motor, pump and blower

Functions

Simultaneous Measurements

Support of quick and easy measurements There many functions to express characteristics of vibration. However, it is necessary for the conventional vibrometers that same point is measured plural times switching objective functions one by one.
CardVibro which has simultaneous measurement function can measure Displacement, Velocity, Acceleration and Acceleration Envelope for Bearing Condition Assessment simultaneously just being pressed on the measurement start key.

FFT Analysis

For investigation of cause of vibrationIf the measured magnitude of vibration is too large, cause investigation by FFT is recommended. CardVibro Neo is possible to perform Frequency Analysis only by the minimum condition setting . Try fine analysis with 1600lines on the small body. CardVibro Neo could be your strong handheld weapon to root out the harmful vibration.

Data Saving

Important basic functionAll Data acquired can be saved. If the PDA compatible to the storage card as SD card is used, more Data are possible to be saved. Data can be transferred to P.C. for more efficient handling by using Data handling software.

Bearing Checker Function

Check by earThis is a function that we would like people who judge bearing conditions with acoustic rod to use. By just connecting to headphone / earphone, sound is listened with vibration measurement.

judging value is equipped

Judgement just after measurementVibration measurement for condition check of rotational machines such as blower or motor, everyone wants to judge condition with measured data immediately. However, you cannot judge in the first measurement. You can diagnose with bearing judging value set for Card Vibro Air by ISO-10816[JIS-B-0906] Standard, vibration severity and the world's largest bearing maker, SKF.

Time Waveform Measurement

Figure out vibration variance at one viewRolling phenomenon has characteristics on its waveform, so you can recognise at one view. You can record the waveform up to 10 sec.

Correspond to three kinds of pickups

Play three Vibration Measuring uses only with this oneWe have prepared three principle pickups, which are accelerometer corresponding to wide frequency range, electro-dynamic velocity type suitable for small displacement measurement, and Piezo-resistive type suitable for low frequency. Vibration Measuring which used to be used according to uses will be one.

Use of PDA application

You cannot be satisfied with only measuring vibrationDisplay of CardVibro Neo is changeable to the PDA function when the pocket calculator is required for the frequency calculation or the schedule is checked during the measurement on site. If the data is renewed, the schedule will be updated synchronized with PC. Versatile PDA application will be available for your job.

General Specifications

Item	Specifications
Model	VM-2004Neo TYPE212
Suitable PC	Corresponding PDA OS: MicrosoftR Windows MobileR 6 Classic MicrosoftR Windows MobileR 5.0 Processor: MarvellR Processor PXA310 624MHz (or more than) Memory（RAM）: 128MB or more Interface: model that equips CF card with Type II slot and SD card slot
Interface with Pocket PC	CF card with Type II slot
Power supply	＋3.3V（It is supplied from Pocket PC.）
Temperature Range Humidity Range	0～＋45℃ 30～90% RH not due condensation
Weight	25g approx（. Only the card）
Dimensions	60.0×42.1×16.9（mm）
Interface for Pickup Input	AC voltage signal Max±2.5V Input Terminal : 8-pin modular jack（RJ-45）
Raw Waveform Output（PU OUT）	Outputs the voltage signal which the sensor input signal is amplified by the used range magnification（x1/x5/x20/x100） Output Terminal : 2.5φ mini-jack
Sampling Frequency	MAX. 76.8kHz（Changes according to Mode.）76.8kHz／38.4kHz／19.2kHz／9.6kHz
Aliasing Filter	20kHz/2kHz（Changes according to Mode.）
A/D	16bit
Available Language	Japanese, English, Chinese and Korean^※

Measurement Specifications

Item	Specifications
Overall Measurement	Select Simultaneous Meas.／Single Meas.
Judgment	○ISO Vibration Evaluation（ISO-10816［JIS-B-0906］standard） ○Bearing Evaluation
FFT Spectrum Analysis	○Lines of Resolution：Max. 1600lines ○Trigger function ○Dominant frequency component of highest 5 display function
Time Waveform Measurement	○Measuring Time：Max. 10 second ○Trigger function
Notes function	○Memo for every Machine,Measuring Point can be recorded. （Data of rotational number, temperature, power, pressure etc other than vibration can be saved.）
Data Save・ Control	○Saves the information of machine name, measuring point, detected direction, note, measuring data, measuring condition etc in addition to the measured data. ○Pocket PC（memory 64MB）can save OA:2000 points, FFT:1000 points, WV:5MB （with the use of external memory as SD card, more data can be saved.）

Specifications with Accelerometer VP-2001A（Standard）

Separation	Specifications
Measurement Type Frequency Range （Filter）	Acceleration：A	10～10kHz（fmax is changeable）
	Velocity: V	10～1kHz
	Displacement: D	10～150Hz
	Enveloped Acceleration：E1	DC～50Hz（5～100Hz[BPF]）
	Enveloped Acceleration：E2	DC～500Hz（5～1kHz[BPF]）
	Enveloped Acceleration：E3	DC～5kHz（500～10kHz[BPF]）
	Enveloped Acceleration：E4	DC～10kHz（5～20kHz[BPF]）
Measuring Range	Max. Acceleration	500m/s²
Range	Acceleration：A Enveloped ：E1,E2,E3,E4	4range,10,50,200,1000m/s ²,Fixed/Auto
	Velocity: V	4range,10,50,200,1000mm/s , Fixed/Auto
	Displacement: D	range,50,250,1000,5000μm p-p, Fixed/Auto