Máy hiệu chuẩn áp suất kiểu tải trọng Fluke P3011-KPA-P (chân không 3 đến 100 kPa, PCU đơn)

Accuracy

Accuracy*

±0.015% of reading (±0.008% optional)

*Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.

Mass and PCU Materials of Construction

Standard weight material

Series 3 non-magnetic austenitic stainless steel

Weight density

7.8 g/cm³

Optional fractional weights

Solution heat treated aluminum

Weight density

2.7 g/cm³

Models P3011, P3012, P3013, P3022, P3023, P3025 (V)

Piston Material:                   Ceramic
Cylinder Material:                Martensitic steel
Coefficient of Expansion:     11 ppm/°C

Models P3014, P3015, P3025 (P) P3031, P3032 (P & V)

Piston Material:                   Tungsten carbide
Cylinder Material:                Martensitic steel
Coefficient of Expansion:     16.5 ppm/°C

Model P3016

Piston Material:                  Tungsten carbide
Cylinder Material:               Tungsten carbide
Coefficient of Expansion:     11 ppm/°C

General

Test port adaptors

1/8, 1/4, 3/8 and ½ NPT or BSP

Instrument weight

24 lbs

Instrument size

17.5 W x 12 D x 8.5 H

Mass set weight (typical)

65 lbs

Minimum Standard Weight Increments

P3012, P3022 Pressure

1 inH2O, (5 mbar)

P3013, P3023 Pressure

2 inH2O, (10 mbar)

P3014, P3015, P3025 Pressure

1 psi, (0.1bar)

P3016, P3031, P3032

1 psi, (0.1bar)

P3011, P3022, P3023, P3025 Vacuum

0.2 inHg (10 mbar)

Optional Fractional Weights

P3014, P3015, P3025 Pressure

0.1 psi (0.01 bar)

Built-in Hand Pumps

Pressure mode

Max pressure 300 psi (20 bar)

Vacuum mode

To 90% vacuum

Operating Fluid for Liquid Lubricated Models

55-655

mineral oil (standard)

Krytox

for oxygen-safe applications (optional)

Options

PressCal Software

Windows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments.

Krytox

As operating fluid for liquid lubricated gas operated models.