Máy phân tích logic Tektronix TLA6403 (102CH)

Hãng sản xuất Tektronix Mỹ
Model:  TLA6403 

Số kênh: 102
Tốc độ thời gian cao: 25 GHz (40 ps) with 128 Kb record length 
Thời gian lấy mẫu lớn nhất (Half/Full channel): 3.2 GHz / 1.6 GHz 
Tốc độ Clock Max:  333 MHz (standard) , 667 MHz (with Option 1T) 
Tốc độ dữ liệu Max: 667 Mb/s (standard), 1333 Mb/s (with Option 1T) 
Bộ nhớ dài Max: 2 Mb (standard), 4 Mb (Option 1S), 8 Mb (Option 2S), 16 Mb (Option 3S), 32 Mb (Option 4S), 64 Mb (Option 5S) 
Analog Mux: 4 fixed channels (standard), Any signal (user selectable) may be routed to 4 output BNCs with Option AM 
Cung cấp kèm theo:  Bàn phím, chuột quang, nắp đậy, CD phần mềm, chứng chỉ của hãng

Đầu đo chưa bao gồm: (chọn mua thêm cần thiết, chú ý số lượng đầu đo tương ứng số kênh)
+ P5910 - 17-channel General-purpose probe (option) 
+ P5934 - 34-channel Mictor probe (option) 
+ P5960 - 34-channel D-MAX probe (option)

Specifications

All specifications apply to all models unless noted otherwise.

TLA6400 selection guide

General characteristics

Number of channels (all channels are acquired including clocks)

TLA6401

34 channels (2 are clock channels). Clock channels can also be used as qualifiers.

TLA6402

68 channels (4 are clock channels). Clock channels can also be used as qualifiers.

TLA6403

102 channels (4 are clock and 2 are qualifier channels). Clock channels can also be used as qualifiers.

TLA6404

136 channels (4 are clock and 4 are qualifier channels). Clock channels can also be used as qualifiers.

Channel grouping

No limit to number of groups or number of channels per group (all channels can be reused in multiple groups).

Time stamp

54 bits at 20 ps resolution (>4 days duration)

Clocking/acquisition modes

Asynchronous/Synchronous; 25 GHz MagniVu high-speed timing is available simultaneous with all modes.

PC characteristics

Operating system

Microsoft® Windows® 7 Ultimate, 64-bit

Processor

Intel® Core i3-2120, 3.3 GHz, 3M Cache

Chipset

Intel® Q67 chipset

Memory

2 × 2 GB DIMM, 4 GB Total

DDR3, 1066 MHZ, PC3-8500 

Sound

Line In, Line Out, and Mic In connectors

 

3.5 in., ≥500 GB Serial ATA, 7200 RPM

Optical drive

Internal 4.7 GB DVD±R/RW

External display port type

One (1) DVI connector and one (1) VGA connector

External display resolution

Up to 1920 × 1200 noninterlaced at 32-bit color, each for both primary and secondary displays

Network port

Two (2) 10/100/1000 LAN with RJ-45 connector

USB port

Five (5) USB 2.0 ports and two (2) USB 3.0 ports. USB ports can be disabled in BIOS.

Integral controls

Front panel display

Size: 15 in. (38.1 cm) diagonal

Type: Active-matrix color TFT LCD with backlight

Resolution: 1024 × 768 

Simultaneous display capability

Both the front-panel and one external display can be used simultaneously at 1024 × 768 resolution

Front panel

General-purpose knob with dedicated hotkeys and knobs for horizontal and vertical scaling and scrolling

Touch screen

Available with Option 18. Can be enabled/disabled with a front-panel button.

Integrated View (iView™) capability

TLA mainframe configuration requirements

GPIB-iView™ (Opt. 1C)

USB-iView™ (Opt. 2C)

Number of Tektronix oscilloscopes that can be connected to a TLA system

1 

External oscilloscopes supported

More than 100. For a complete listing of current supported oscilloscopes, please visit our website http://www.tektronix.com/iview.

TLA connections

USB, Trigger In, Trigger Out, Clock Out

Oscilloscope connections

GPIB-iView™ (Opt. 1C)

GPIB, Trigger In, Trigger Out, Clock In (when available)

USB-iView™ (Opt. 2C)

USB Device Port, Trigger In, Trigger Out

Setup

iView™ external oscilloscope wizard automates setup.

Data correlation

After oscilloscope acquisition is complete, the data is automatically transferred to the TLA and time correlated with the TLA acquisition data.

Deskew

The oscilloscope and TLA data is automatically deskewed and time correlated when using the iView™ external oscilloscope cable.

GPIB-iView™ (Opt. 1C) External oscilloscope cable length

2 m (6.6 ft.)

USB-iView™ (Opt. 2C) External oscilloscope cable length

2 m (6 ft.)

Symbolic support

Number of symbols/ranges

Unlimited (limited only by amount of virtual memory available on TLA)

Object file formats supported

IEEE695, OMF 51, OMF 86, OMF 166, OMF 286, OMF 386, COFF, Elf/Dwarf 1 and 2, Elf/Stabs, TSF (If your software development tools do not generate output in one of the above formats, TSF, or the Tektronix symbol file, a generic ASCII file format is supported. The generic ASCII file format is documented in the TLA online help). If a format is not listed, please contact your local Tektronix representative.

External instrumentation interface

System Trigger output

Asserted whenever a system trigger occurs (TTL-compatible output, back-terminated into 50 Ω)

System Trigger input

Forces a system trigger when asserted (adjustable threshold between 0.5 V and 1.5 V, edge sensitive, falling-edge latched)

External Signal output

Can be used to drive external circuitry from a module trigger mechanism (TTL-compatible output, back-terminated into 50 Ω)

External Signal input

Can be used to provide an external signal to arm or trigger any or all modules (adjustable threshold between 0.5 V and 1.5 V, level sensitive)

Power

Voltage range/frequency

90-264 VAC at 47-63 Hz

Power consumption

400 W maximum

Environmental

Temperature

Operating

+5 °C to +40 °C

Nonoperating

-20 °C to +60 °C

Humidity

Max wet bulb temperature: +29 °C

Operating

20% to 80% relative humidity noncondensing

Nonoperating

8% to 80% relative humidity noncondensing

Altitude

Operating

To 3,000 meters (10,000 ft.), derate maximum operating temperature by 1 °C per 300 meters above 1,500 meters altitude

Nonoperating

To 12,000 meters (40,000 ft.)

Safety

UL61010-1:2004, CAN/CSA-C22.2 No. 61010-1:2004, EN61010-1:2001, and IEC61010-1:2001 

Physical characteristics

Dimensions

Height

297 mm (11.7 in.)

Width

437 mm (17.2 in.)

Depth

387 mm (15.2 in.)

Net weight

TLA6401

13.5 kg (29 lb. 13 oz.)

TLA6402

13.9 kg (30 lb. 10 oz.)

TLA6403

14.3 kg (31 lb. 8 oz.)

TLA6404

14.7 kg ( 32 lb. 5 oz.)

Shipping weight

TLA6401

20.5 kg (45 lb. 2 oz.)

TLA6402

20.9 kg (46 lb. 1 oz.)

TLA6403

21.3 kg ( 47 lb.)

TLA6404

21.7 kg (47 lb. 8 oz.)

Input characteristics

Threshold selection range

From -2.0 V to +4.5 V in 5 mV increments

Threshold presets include TTL (1.5 V), CMOS (1.65 V), ECL (-1.3 V), PECL (3.7 V), LVPECL (2.0 V), LVCMOS 1.5 V (0.75 V), LVCMOS 1.8 V (0.9 V), LVCMOS 2.5 V (1.25 V), LVCMOS 3.3 V (1.65 V), LVDS (0 V), and user defined.

Threshold selection channel granularity

Separate selection for each channel

Threshold accuracy

23 °C ±5 °C

±(50 mV + 1% of threshold voltage setting) of threshold voltage setting

Full range

±(80 mV + 2%)

Input voltage range

Operating

-2.5 V to 5.0 V

Nondestructive

-4.5 V to +13 V

Minimum input voltage swing

300 mV (P5910 and P5960)

State acquisition system

Maximum State clock rate

333 MHz (standard)

667 MHz (optional)

Maximum data rate

667 Mb/s (standard)

1333 Mb/s (optional)

State record length with time stamps

2 Mb, 4 Mb, 8 Mb, 16 Mb, 32 Mb, 64 Mb

Setup and hold selection range

From 15 ns before, to 7.5 ns after clock edge in 20 ps increments

Setup and hold window

Single channel

260 ps typical (P5910 and P5960)

Minimum clock pulse width

250 ps (P5910 and P5960)

Timing acquisition system

MagniVu™ timing

40 ps, adjustments to 80 ps, 160 ps, 320 ps, and 640 ps

MagniVu timing record length

128 Kb per channel, with adjustable trigger position

Deep timing resolution (half/full channel)

312.5 ps / 625 ps to 50 ms

Deep timing resolution with glitch storage enabled

1.25 ns to 50 ms

Deep timing record length (half/full channels with time stamps and with or without transitional storage)

4/2 Mb, 8/4 Mb, 16/8 Mb, 32/16 Mb, 64/32 Mb, 128/64 Mb per channel

Deep timing record length with glitch storage enabled

Half of default main memory depth

Channel-to-channel skew

160 ps typical (P5910 and P5960)

Minimum recognizable pulse/glitch width (single channel)

250 ps (P5910 and P5960)

Minimum detectable setup/hold violation

80 ps

Minimum recognizable multichannel Trigger event

Sample period + channel-to-channel skew

Analog acquisition system

Bandwidth

2 GHz typical (P5910 and P5960)

Attenuation

10X or 5X

Offset and Gain (accuracy)

±80 mV, ±2% of signal amplitude

Run/Stop requirements

None, analog outputs are always active

iCapture™ Analog outputs

Compatible with any supported Tektronix oscilloscope

iCapture Analog output BNC cable

4; Low loss, 10X, 36 in. Basic Analog Multiplexer functionality is offered standard on all TLA6400 models. This routes 4 fixed channels to the iCapture Analog Output BNCs. The outputs cannot be switched to other logic analyzer channels. Option AM enables full analog multiplexer control and allows the routing of any 4 logic analyzer channels to the iCapture Analog Output BNCs.

Trigger system

Independent Trigger states

16 

Maximum idependent If/Then clauses per state

16 

Maximum numger of events per If/Then clause

8 

Maximum number of actions per If/Then clause

8 

Maximum number of Trigger events

26 (2 counters/timers plus any 24 other resources)

Number of word recognizers

24 

Number of transition recognizers

24 

Number of range recognizers

8 

Number of counters/timers

 

Trigger event types

Word, Group, Channel, Transition, Range, Anything, Counter Value, Timer Value, Signal, Glitch, Setup-and-Hold Violation, Snapshot

Trigger action types

Trigger Module, Trigger All Modules, Trigger Main, Trigger MagniVu, Store, Don not Store, Store Sample, Increment Counter, Decrement Counter, Reset Counter, Start Timer, Stop Timer, Reset Timer, Snapshot Current Sample, Goto State, Set/Clear Signal, Do Nothing

Maximum triggerable data rate

1333 Mb/s

Trigger machine sequence rate

DC to 800 MHz (1.25 ns)

Counter/timer range

48 bits each (~4 days at 1.25 ns)

Counter rate

DC to 800 MHz (1.25 ns)

Timer clock rate

800 MHz (1.25 ns)

Counter/timer test latency

0 ns

Range recognizers

Double bounded (136 channel max). Can be as wide as any group, must be grouped according to specified order of significance.

Setup-and-hold violation recognizer setup time range

From 7.5 ns before, to 7.5 ns after clock edge in 20 ps increments. This range may be shifted toward the positive region by 0 ns, 2.5 ns, 5 ns, or 7.5 ns.

Setup-and-hold violation recognizer hold time range

From 7.5 ns before, to 7.5 ns after clock edge in 20 ps increments. This range may be shifted toward the positive region by 0 ns, 2.5 ns, 5 ns, or 7.5 ns.

Trigger position

Any data sample

MagniVu trigger postion

MagniVu position can be set from 0% to 60% centered around the MagniVu trigger

Storage control (data qualification)

Global (conditional), by state (start/stop), block, by trigger action, or transitional. Also force main prefill selection available.

P5900 series probes

General

Characteristic	P5910	P5934	P5960
Probe type	Single-ended data Single-ended clock  (General Purpose)	Single-ended data Single-ended clock  (Mictor 34-channel)	Single-ended data Single-ended clock  (D-Max® Probing technology)
Number of channels	17	34	34
Recommended usage	Most general-purpose applications	Applications requiring many channels to be connected quickly in a small footprint	High-performance applications requiring many channels to be connected quickly in a small footprint
Attachment to target system	Fits both 0.100 in. and 2 mm square pin configuration	Amp Mictor 34-channel connector	D-Max probing technology
Probe load AC/DC	1.3 pF/20 kΩ to 0 V	2 pF/20 kΩ to 0 V	0.8 pF/20 kΩ to 0 V
Input range	-2.5 V to +5 V
Maximum voltage (nondestruct)	-4.5 V to +13 V
Cable length	1.5 m (5 ft.)	1.2 m (4 ft.)	1.5 m (5 ft.)