(Click vào để xem ảnh lớn)

Bộ ghi dữ liệu Hioki HiLOGGER LR8400-20

Giá: Liên hệ Lượt xem: 0 Hàng mới

Giá: VND

Chi tiết sản phẩm

THÔNG SỐ KỸ THUẬT:

Hãng: Hioki

Model: LR8400-20

Xuất sứ: Nhật bản

THÔNG SỐ KỸ THUẬT

- Đầu vào Analog UNIVERSAL UNIT LR8501:

+ 15 kênh analog

+ Điện áp:10mV~100V, 1-5V f.s/ Độ phân giải: 500nV

+ Nhiệt độ: -200°C ~ 2000°C./ Độ phân giải: 0.01°C

+ Nhiệt độ: cảm biến Pt 100, JPt 100. -200°C~800°C, độ phân giải 0.01°C

+ Điện trở: 10 Ω~200 Ω f.s.

+ Độ ẩm: 100 % rh f.s. 5.0~95.0 % rh/ độ phân giải 0.1% rh

- Đầu vào Analog VOLTAGE/TEMP UNIT LR8500:

+ 15 kênh analog

+ Điện áp: 10 mV~100 V, 1-5 V f.s. / độ phân giải: 500 nV

+ Nhiệt độ: -200°C~2000°C /độ phân giải 0.01°C

+ Độ ẩm 100 % rh f.s. 5.0~95.0 % rh / độ phân dải 0.1 % rh

- Đầu vào xung số:

+ 8 kênh (pulse / digital)

+ Pulse totalization: 0~1000 M pulse

+ Pulse revolutions: 0 to 5000 /n (r/s) f.s/ resolution 1/n(r/s)

- Thời gian ghi dữ liệu: 10ms~50ms, 100ms~1hour, 19 lựa chọn

- Lọc số: lựa chọn OFF/ 50 Hz/ 60 Hz

- Bộ nhớ dữ liệu: 8 M-words, CF card or USB memory

- Giao tiếp: LAN-100BASE-TX/ USB2.0

- Hiển thị: 5.7 inch TFT color liquid crystal display

- Chức năng khác: Lưu dữ liệu từ thẻ nhớ CF xang thẻ nhớ USB

- Nguồn:

+ AC ADAPTER 9418-15: 100 to 240 V AC, 50/60 Hz), 7VA

+ BATTERY PACK Z1000

- Khối lượng sản phẩm: 1.8 kg

- Kích thước sản phẩm: 272*182*66.5mm

- Phụ kiện đi kèm:

+ Detailed operating manual ×1, Measurement guide ×1

+ AC ADAPTER 9418-15 ×1, USB cable ×1

+ CD-R (data collection software "Logger Utility") ×1

- Thời gian bảo hành: 12 tháng

Analog input UNIVERSAL UNIT LR8501 Actual functionality will depend on combination of units installed Note: Isolated from each channel to chassis	[No. of channels] 15 analog channels; isolated scanning method input (4 terminals: push-button type) [Voltage] 10 mV to 100 V, 1-5 V f.s. 10 ranges, Max. resolution: 500 nV Note: Isolated between channels and from each channel to chassis [Temperature: Thermocouples] -200°C to 2000°C (depends on sensor), 3 ranges (K, J, E, T, N, R, S, B, W), Max. resolution 0.01°C Note: Isolated between channels and from each channel to chassis [Temperature: Pt 100, JPt 100 sensor] -200°C to 800°C, 3 ranges, Max. resolution 0.01°C Note: Not isolated between channels [Resistance] 10 Ω to 200 Ω f.s. 4 ranges, Max. resolution 0.5 mΩ Note: Not isolated between channels [Humidity] 100 % rh f.s. 5.0 to 95.0 % rh (when using Z2000), resolution 0.1 % rh Note: Not isolated between channels nor from each channel to chassis [Max. rated voltage between isolated input channels] 300 V DC [Max. allowable input] ±100 V DC [Max. rated voltage from isolated terminals to ground] 300 V AC, DC
Analog input VOLTAGE/TEMP UNIT LR8500 Actual functionality will depend on combination of units installed Note: Isolated from each channel to chassis	[No. of channels] 15 analog channels; isolated scanning method input (2 terminals: M3 screw type) [Voltage] 10 mV to 100 V, 1-5 V f.s. 10 ranges, Max. resolution: 500 nV Note: Isolated between channels and from each channel to chassies [Temperature: Thermocouples] -200°C to 2000°C (depends on sensor), 3 ranges (K, J, E, T, N, R, S, B, W), Max. resolution 0.01°C Note: Isolated between channels and from each channel to chassies [Temperature: Pt 100, JPt 100 sensor] [Resistance] not available [Humidity] 100 % rh f.s. 5.0 to 95.0 % rh (when using Z2000), resolution 0.1 % rh Note: Not isolated between channels nor from each channel to chassies [Max. rated voltage between isolated input channels] 250 V DC [Max. allowable input] ±100 V DC [Max. rated voltage from isolated terminals to ground] 300 V AC, DC Caution: Max. voltage from terminals to ground without damage
Pulse, Digital input	[No. of channels] 8 channels, pulse / digital selectable for each channel, M3 screw terminal, not isolated, common ground [Pulse totalization] 0 to 1000 M pulse, 1 range (No-voltage a contact; normally open, open collector or voltage input), Max. resolution 1 pulse [Pulse revolutions] 0 to 5000 /n (r/s) f.s. 1 range (same as Pulse totalization input signal condition), resolution 1/n (r/s) Note: "n" is the number of sensor output pulses per revolution, 1 to 1000 [Digital input] Record logical 1 or 0at each sampling [Max. rated voltage between input channels] Not isolated [Max. allowable input] 0 to 50 V
Recording intervals	10 ms to 50 ms, 100 ms to 1 hour, 19 selections (All input channels are scanned at high speed during every recording interval) Note: limited by using channels at 10 ms to 50 ms interval
Digital filter	Select from OFF/ 50 Hz/ 60 Hz (the cut-off frequency is automatically set)
Data storage	Internal memory: 8 M-words, Data storage media: CF card or USB memory (Only data recorded to a genuine HIOKI CF card is guaranteed)
LAN interface	100BASE-TX, Functions: Data acquisition using bundled software or PC commands, FTP server, FTP client, HTTP server function, or E-mail system Note: LAN communication support planned from software Ver. 1.20
USB interface	USB 2.0 High-speed capable, series mini-B receptacle Functions: Data acquisition using bundled software or PC commands, Transfer data from the CF card to a PC via USB drive mode Note: Data transfer not possible from USB memory sticks
Display device	5.7 inch TFT color liquid crystal display (640 × 480 pixel)
Other functions	Save waveform data in real time to the CF card or USB memory stick, Numerical value calculations, Waveform calculations, and others
AC Power	Using the AC ADAPTER 9418-15 (100 to 240 V AC, 50/60 Hz), 7 VA
DC Power	Using the BATTERY PACK Z1000 (optional accessory), Continuous use 5 hr, External power: 10 to 28 V DC (Please contact your HIOKI distributor for connection cord)
Dimensions and Mass	272 mm (10.71 in) W × 182.4 mm (7.18 in) H × 66.5 mm (2.62 in) D, 1.8 kg (63.5 oz), (LR8400-20 main unit, excluding the Battery Pack 370 g/ 13.1 oz)
Accessories	Detailed operating manual ×1, Measurement guide ×1, AC ADAPTER 9418-15 ×1, USB cable ×1, CD-R (data collection software Logger Utility) ×1