LeCroy WaveAce 222 Máy hiện sóng số (200 MHz, 2 GS/s, 2 kênh)

Giá: Liên hệ Lượt xem: 0 Hàng mới

Giá: 55.900.000 VND

Chi tiết sản phẩm

THÔNG SỐ KỸ THUẬT:

Hãng sản xuất: Teledyne LeCroy - USA

Model: WaveAce 222

Vertical System
Bandwidth	200 MHz
Rise time	1.8 ns
Input Channels	2
Bandwidth Limiters	20 MHz
Input Impedance	1 MΩ ± 2% \|\| 13 pF ± 3 pF, 50 Ω ± 2%
Input Coupling	AC, DC, GND
Maximum Input Voltage	1 MΩ: ± 400 Vpk, 50 Ω: 5 VRMS
Channel-Channel Isolation	≥ 100:1 at 100 MHz
Vertical Resolution	8 bits
Sensitivity	2 mV/div - 5 V/div
DC Gain Accuracy	±3%: 5 mV/div - 5 V/div (fixed gain ranges) ±4%: 2mV/div and variable gain ranges
Offset Range	±800 mV: 2mV/div - 100 mV/div ±40V: 102 mV/div - 5 V/div

Horizontal System
Time/Division Range	2.5 ns/div - 50 s/div
Clock Accuracy	100 ppm
Trigger and Interpolator Jitter	.5 ns (pk-pk)

Acquisition System
Single-Shot Sample Rate/Ch	2 GS/s on 1 Ch 1 GS/s on 2 Ch
Equivalent Sample Rate	50 GS/s
Memory	18 kpts/Ch on 1 Ch 9 kpts/ch on 2 Ch

Acquisition Modes
Averaging	Selectable Number of Sweeps: 4, 16, 32, 64, 128, 256
Peak Detect	2.5 ns
Interpolation	Linear, Sin x/x
Enhanced Resolution	na
Sequence Mode	na

Triggering System
Modes	Normal, Auto, Single, Stop
Sources	Ch 1 - Ch 2, EXT, EXT/5, AC Line
Coupling Mode	AC, DC, LF Rej, HF Rej,
Pre-trigger Delay	memory/(2 * sample rate)
Post-trigger Delay	260 Divisions
Hold-off by Time or Events	100 ns - 1.5 s
Internal Trigger Range	±6 divisions from center
Trigger Sensitivity	1 division: DC - 10 MHz 1.5 divisions: 10 MHz - 200 MHz
External Trigger Sensitivity	Ext: 200 mVpp from DC to 10 MHz 300 mVpp from 10 MHz to 200 MHz Ext/5: 1Vpp from DC to 10 MHz 1.5 mVpp from 10 MHz to 200 MHz
External Trigger Input Range	Ext: ±1.2 V, EXT/5: ±6 V

Display
Type	Color 5.7" TFT-LCD
Resolution	QVGA; 320 x 234 pixels
Grid Styles	YT (12 horizontal divisions), XY

Trigger Types
Optional Advanced Triggers	na
Optional Serial Data Triggers	na

Internal Storage
Waveform Storage	20 waveforms and 2 reference waveforms
Setup Storage	20 setups

Math
Number of Math Traces	1
Standard Math Functions	Add, Subtract, Multiply, Divide, FFT
Optional Math Functions	na

Measurements
Number of Measurements Displayed	5
Measurement Parameters	Amplitude, Average, Base, Burst Width, Cyclical RMS, +Duty Cycle, -Duty Cycle, Fall Time, Frequency, Max, Mean, Min, Overshoot, Peak-Peak, Period, Phase, Rise Time, RMS, Top, +Width, -Width, First Rising-Rising, First Rising-Falling, First Falling-Rising, First Falling-Falling, Last Rising-Rising, Last Rising-Falling, Last Falling-Rising, Last Falling-Falling

Probes
Probes	Qty. (2) ÷10/1 Passive Probes
Scale Factors	Manual: ÷1, ÷10, ÷100, ÷1000
Calibration Output	1 kHz square wave, 3Vp-p (typical), output to probe hook

Interface
GPIB Port (optional)	na
USB (Device)	1
Ethernet Port	na
USB (Host)	1
Serial Port	1

Power Requirements
Voltage	100 - 240 VAC, 45 Hz to 440 Hz
Max. Power Consumption	50 VA

Environmental and Safety
Temperature (Operating)	10 °C to 40 °C
Temperature (Non-Operating)	-20 °C to 60 °C
Humidity (Operating)	85% RH, 40 °C
Humidity (Non-Operating)	85% RH, 65 °C
Altitude (Operating)	3000 m
Altitude (Non-Operating)	15,266 m

Physical Dimensions
Dimensions (HWD)	154 mm x 305 mm x 133 mm (6" x 12" x 5.25")
Weight	2.3 kg (5 lbs)