22 Lý Tự Trọng, Minh Khai, Hồng Bàng, Hải Phòng.

itvc.haiphong@itvc-global.com

LeCroy WaveJet 324A Máy hiện sóng số (200 MHz, 1 GS/s, 4 kênh)

(Click vào để xem ảnh lớn)

LeCroy WaveJet 324A Máy hiện sóng số (200 MHz, 1 GS/s, 4 kênh)

Giá: Liên hệ Lượt xem: 0 Hàng mới

 
Giá133.000.000 VND 

Chi tiết sản phẩm

THÔNG SỐ KỸ THUẬT:
 

Hãng sản xuất: Teledyne LeCroy - USA

Model: WaveJet 324A

Vertical System

Bandwidth 200 MHz
Rise time 1.75 ns
Input Channels 4
Bandwidth Limiters 20 MHz
Input Impedance 1 MΩ ± 1.5% || 20 pF
Input Coupling AC, DC, GND
Maximum Input Voltage ± 400 Vpk
Channel-Channel Isolation ≥ 34 dB from DC - 100 MHz
≥ 30 dB at 200 MHz
Vertical Resolution 8 bits
Sensitivity 2 mV/div - 10 V/div
DC Gain Accuracy ±(1.5% + 0.5% of Full Scale)
Offset Range ±1 V: 2 mV/div - 50 mV/div
±10 V: 50.2 mV/div - 500 mV/div
±100 V: 502 mV/div - 10 V/div
 

Horizontal System

Time/Division Range 2 ns/div - 50 s/div
Clock Accuracy 10 ppm
Trigger and Interpolator Jitter 500 ps (pk-pk)
 

Acquisition System

Single-Shot Sample Rate/Ch 1 GS/s
Equivalent Sample Rate 100 GS/s
Memory 500 kpts/Ch
 

Acquisition Modes

Averaging Selectable Number of Sweeps:
4, 16, 32, 64, 128, 256
Peak Detect 1 ns
Interpolation Linear
Enhanced Resolution na
Sequence Mode na
 

Triggering System

Modes Normal, Auto, Single, Stop
Sources Ch 1 - Ch 4, EXT, EXT/10, AC Line
Coupling Mode AC, DC, LF Rej, HF Rej,
Hold-off by Time or Events 200 ns - 50 s
Internal Trigger Range ±5 divisions from center
Trigger Sensitivity 0.5 division: DC - 10 MHz
2.0 divisions: 10 MHz - 200 MHz
External Trigger Sensitivity Ext: 50 mV from DC to 10 MHz
250 mV from 10 MHz to 200 MHz
Ext/10: 0.5 V from DC to 10 MHz
2.5 mV from 10 MHz to 200 MHz
External Trigger Input Range Ext: ±0.5 V, EXT/10: ±5.0 V
 

Display

Type Color 7.5" TFT-LCD
Resolution VGA: 640 x 480
Grid Styles YT, XY
 

Trigger Types

Optional Advanced Triggers na
Optional Serial Data Triggers na
 

Internal Storage

Waveform Storage 1 reference waveform
Setup Storage 5 setups
 

Math

Number of Math Traces 1
Standard Math Functions Add, Subtract, Multiply, FFT
Optional Math Functions na
 

Measurements

Number of Measurements Displayed 4
Measurement Parameters Base, Cyclical Mean, Cyclical RMS, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency Integral, Maximum, Mean, Minimum, Number of +Pulses, Number of -Pulses, +Overshoot, -Overshoot, Peak-Peak, +Pulse Width, -Pulse Width, Rise Time (20% - 80%), Rise Time (10% - 90%), RMS, Skew, Skew@level, Top, Top-BAse
 

Probes

Probes Qty. (4) ÷10 Passive Probes
Scale Factors Automatic: ÷1, ÷10, ÷100, ÷1000
Manual: ÷1, ÷10, ÷20, ÷100, ÷200, ÷1000, ÷2000
Calibration Output 1 kHz square wave, 0.6 Vp-p (typical), output to probe hook
 

Interface

GPIB Port (optional) 1 (optional)
USB (Device) 1
Ethernet Port 1 (optional)
USB (Host) 1
Serial Port na
 

Power Requirements

Voltage 90 - 264 VAC, 47 HZ - 420 Hz
Max. Power Consumption 75 VA
 

Environmental and Safety

Temperature (Operating) 0 °C to 40 °C
Temperature (Non-Operating) -20 °C to 60 °C
Humidity (Operating) 80% RH, 40 °C
Humidity (Non-Operating) 80% RH, 40 °C
Altitude (Operating) 2000 m
Altitude (Non-Operating) 15000 m
 

Physical Dimensions

Dimensions (HWD) 190 mm x 285 mm x 102 mm
(7.5" x 11.2" x 4")
Weight 3.2 kg (7 lbs)
Gọi ngay: 0914.564.579
SMS: 0914.564.579 Chat Zalo Chat qua Messenger