LeCroy WaveSurfer 62MXs-B Máy hiện sóng số (600 MHz, 5 GS/s, 2 kênh)

Giá: Liên hệ Lượt xem: 0 Hàng mới

Giá: 303.600.000 VND

Chi tiết sản phẩm

THÔNG SỐ KỸ THUẬT:

Hãng sản xuất: Teledyne LeCroy - USA

Model: WaveSurfer 62MXs-B

Vertical System
Bandwidth	600 MHz
Rise time	500 ps
Input Channels	2
Bandwidth Limiters	20 MHz, 200 MHz
Input Impedance	1 MΩ ± 1.0% \|\| 16 pF ± 2 pF, 50 Ω ± 1.0%
Input Coupling	AC, DC, GND
Maximum Input Voltage	1 MΩ: ± 250 Vpk, 50 Ω: 5 VRMS
Channel-Channel Isolation	≥ 52 dB at 100 MHz ≥ 30 dB at 600 MHz
Vertical Resolution	8 bits
Sensitivity	1 MΩ: 2 mV/div - 10 V/div 50 Ω: 2 mV/div - 1 V/div
DC Gain Accuracy	±1.5%
Offset Range	±1 V: 2 mV/div - 99 mV/div ±10 V: 100 mV/div - 1.0 V/div ±100 V: 1.02 V/div - 10 V/div

Horizontal System
Time/Division Range	200 ps/div - 1000 s/div
Clock Accuracy	5 ppm
Trigger and Interpolator Jitter	3 ps (rms)

Acquisition System
Single-Shot Sample Rate/Ch	10 GS/s on 1 Ch 5 GS/s on 2 Ch
Equivalent Sample Rate	50 GS/s
Memory	32 Mpts/Ch on 2 Ch 16 Mpts/Ch on 4 Ch

Acquisition Modes
Averaging	Up to 1,000,000
Peak Detect	na
Interpolation	Linear, Sin x/x
Enhanced Resolution	Up to 11 bits
Sequence Mode	Up to 5,000 segments

Triggering System
Modes	Normal, Auto, Single, Stop
Sources	Ch 1 - Ch 4, EXT, EXT/10, AC Line
Coupling Mode	AC, DC, LF Rej, HF Rej,
Pre-trigger Delay	0 - 100% Full Scale
Post-trigger Delay	0 - 10,000 Divisions
Trigger Sensitivity	1.0 division: 200 MHz 2.0 division: 600 MHz
External Trigger Sensitivity	Ext: 50 mV from DC to 10 MHz 200 mV from 10 MHz to 600 MHz Ext/10: 0.5 V from DC to 10 MHz 2.0 mV from 10 MHz to 600 MHz
External Trigger Input Range	Ext: ±0.4 V, EXT/10: ±4.0 V

Display
Type	Color Touch Screen 10.4" TFT-LCD
Resolution	SVGA: 800 x 600
Grid Styles	YT, XY

Trigger Types
Standard Triggers	Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified
Optional Advanced Triggers	na
Optional Serial Data Triggers	I2C, SPI, UART/RS-232, CAN, LIN, FlexRay, MIL-STD-1553, ARINC 429, Audio (I2S, LJ, RJ, TDM), USB, MIPI D-PHY, DigRF3G

Internal Storage
Waveform Storage	4 memory waveforms plus internal HDD
Setup Storage	6 setups

Math
Number of Math Traces	1
Standard Math Functions	Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root
Optional Math Functions	na

Measurements
Number of Measurements Displayed	6
Measurement Parameters	Ampltidue, Area, Base, Delay, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Top, Width+, Width-

Probes
Probes	Qty. (2) ÷10 Passive Probes
Scale Factors	Automatic/Manual: ÷1, ÷10, ÷20, ÷100, ÷200, ÷1000, ÷2000, ÷10000 Variable: (÷1x10-6 - ÷10000)
Calibration Output	1 kHz square wave, 1.0 Vp-p, output to probe hook

Interface
GPIB Port (optional)	1 (optional)
USB (Device)	0
Ethernet Port	1
USB (Host)	5
Serial Port	1

Power Requirements
Voltage	90 - 264 VAC, 47 HZ - 63 Hz 90 - 132 VAC, 380 HZ - 420 Hz
Max. Power Consumption	290 VA

Environmental and Safety
Temperature (Operating)	5 °C to 40 °C
Temperature (Non-Operating)	-20 °C to 60 °C
Humidity (Operating)	80% RH, 31 °C 50% RH, 40 °C
Humidity (Non-Operating)	95% RH
Altitude (Operating)	2000 m
Altitude (Non-Operating)	12,192 m

Physical Dimensions
Dimensions (HWD)	260 mm x 340 mm x 152 mm (10.25" x 13.4" x 6")
Weight	7.26 kg. (16.0 lbs.)