Máy phân tích phổ GW instek GSP-830 (9kHz ~ 3Ghz, Tracking Generator)

(Click vào để xem ảnh lớn)

Máy phân tích phổ GW instek GSP-830 (9kHz ~ 3Ghz, Tracking Generator)

Giá: Liên hệ Lượt xem: 0 Hàng mới

Giá: 90.000.000 VND

Chi tiết sản phẩm

THÔNG SỐ KỸ THUẬT:

Model : GSP-830
Hãng : GW Instek
Xuất xứ : Đài Loan
Bảo hành : 12 tháng

1) Tần số
Tần số : 9Khz ~ 3Ghz
Độ già hóa :± 10ppm, 0~50°C, 5ppm/năm
Span : 2Khz ~ 3Ghz
Nhiễu pha : -80dBc/Hz @1GHz 20kHz
Sweep tiem : 50ms ~ 25.6s
2) Độ phân giải băng thông
Giải : 3kHz, 30kHz, 300kHz, 4MHz
Độ chính xác : 15%
3) Biên độ
Giải đo :
-103dBm ~ +20dBm: 1MHz ~ 15MHz, Ref.Level @ -30dBm
-117dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm
-114dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm
Bảo vệ qua tải : Max. +30dBm, ±25VDC
Mức tiêu chuẩn : 110dBm ~ +20dBm
Độ chính xác : ±1dB
4) Tạo sóng đồng chỉnh (Phụ kiện tùy chọn)
Tần số : 9k ~ 3Ghz
Biên độ : -50dBm ~ 0dBm
Độ chính xác :±1dB@100MHz, 0dBm
Nhiễu hài : <-30dBc
Kết nối : Kiểu N
RF output VSWR: < 2:1
4) Thông số cơ bản khác
Mức nhiễu :
         <-135±1dBm/Hz: 1MHz ~ 15MHz, Ref.Level @ -30dBm
         <-149dBm/Hz, typical -152dBm/Hz: 15MHz ~ 1GHz, Ref.Level ≧-110dBm
         <-146dBm/Hz, typical -149dBm/Hz: 1GHz ~ 3GHz, Ref.Level ≧-110dBm
Độ méo hài : <-60dBc RF Input <-40dBm
Đầu vào RF : N - F, 50 Ohm
Điểm ghi : 10 điểm đỉnh
Giao tiếp : RS232, USB, VGA, GPIB (Tùy chọn)
Màn hình : 640x480, TFT LCD
Nguồn : AC 100 ~ 240V, 50/60Hz
Khối lượng : 6kg
Phụ kiện gồm : Đầu nguồn, HDSD, USB Cable

REQUENCY
Frequency Range	9kHz ~ 3GHz
Aging Rate	± 10ppm, 0~50°C, 5ppm/yr
Span Range	2kHz ~ 3GHz in 1-2-5 sequence, full span, zero span
Phase Noise	-80dBc/Hz @1GHz 20kHz offset typical
Sweep Time Range	50ms ~ 25.6s
RESOLUTION BANDWIDTH
RBW Range	3kHz, 30kHz, 300kHz, 4MHz
RBW Accuracy	15%
Video Bandwidth Range	10Hz ~ 1MHz in 1-3 steps
AMPLITUDE
Measurement Range	-103dBm ~ +20dBm: 1MHz ~ 15MHz, Ref.Level @ -30dBm -117dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm -114dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm (Span = 50kHz, RBW = 3kHz)
Overload Protection	Max. +30dBm, ±25VDC
Reference Level Range	-110dBm ~ +20dBm
Accuracy	±1dB @100MHz
Frequency Flatness	±1dB
Display Range Linearity	±1dB over 70dB
DYNAMIC RANGE
Average Noise Floor	<-135±1dBm/Hz: 1MHz ~ 15MHz, Ref.Level @ -30dBm <-149dBm/Hz, typical -152dBm/Hz: 15MHz ~ 1GHz, Ref.Level ≧-110dBm <-146dBm/Hz, typical -149dBm/Hz: 1GHz ~ 3GHz, Ref.Level ≧-110dBm
Third Inter-Modulation	<-70dBc RF Input @-40dBm, Ref.Level @-30dBm
Harmonic Distortion	<-60dBc RF Input <-40dBm Typical, Ref.Level @-30dBm
Non-Harmonic Spurious	<-93dBm, 1MHz ~ 15MHz, Ref.Level @-30dBm <-107dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm <-104dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm (Span = 50kHz, RBW = 3kHz)
GENERAL
Display	640 x 480 high resolution TFT color LCD
Split Windows	Active Window: Upper, Lower or Alternate (two simultaneously sweeping windows)
Markers	10 Markers for peaks: 5 normal-delta marker pairs Functions: Delta, To Peak, To Minimum, Peak Track, Peak Table, Peak Sort
Trace Detection	3 traces with Peak, Maximum hold, Freeze, Average, Trace math
Power Measurement	ACPR, OCBW, Channel Power, N dB and Phase Jitter
Autoset Function	Auto tuning the measurement result for observation
Trigger	Conditions: Video, External (Positive-going, +5V TTL external signal) Mode: Normal, Single, Continuous
Sequence	Automated test by user-defined macros without any remote controller, 10 Sequential macro set and 10 macros per each set, Variable delays and wait-to-go facilitate automated measurement, Do-sequence links and nests different sequence sets.
CONNECTORS
RF Input	N female, 50Ω nominal RF input VSWR: <2:1, @0dBm Reference Level
External Reference	Type: BNC female
Clock Input	1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2MHz
Reference Clock Output	Type: BNC female, 10MHz
DC Input (DC Power Operation)	Jack : 5.5mm, 12V
DC Output (for GAP-801)	Type: SMB Male, outputs +9V/100mA Max.
INTERFACE
RS-232C	Sub-D 9 pins female
USB Connector	USB Host/Device full speed supported
VGA Output	Front panel: Type A receptacle for USB flash devices
Option: GPIB Interface	Fully programmable with IEEE 488.2 compliance
POWER SOURCE
	AC 100 ~ 240V, 50/60Hz
ACCESSORIES
	User Manual x 1 Power Cord x 1 USB Cable (Type A plug to Type mini-B plug) x1
DIMENSIONS & WEIGHT
	330(W) x 170(H) x 340(D) mm Approx. 6kg

Opt. 01	Tracking Generator		Tracking Generator - Frequency Range: 9k~3GHz - Amplitude Range: -50dBm~0dBm - Amplitude Accuracy: ±1dB@100MHz, 0dBm - Amplitude Flatness: ±1dB@0dBm - Harmonics: <-30dBc typical - Reverse Power: +30dBm - Impedance: Type: N female, 50Ω nominal - RF output VSWR: < 2:1
Opt. 02	Battery pack		* 11.1V Li-Ion battery pack *2
Opt. 03	± 1ppm Stability		* ±1ppm, 0~50 °C , ±1ppm/yr
Opt. 04	300Hz RBW		* RBW 300Hz, 3dB bandwidth, RBW Accuracy: 20%
Opt. 05	EMI Filter 9kHz & 120kHz RBW(*)		* RBW selections: 9kHz & 120kHz, 6dB bandwidth, Accuracy: 15%
Opt. 06	10kHz & 100kHz RBW (*)		* RBW selections: 10kHz & 100kHz, 3dB bandwidth, Accuracy: 15%
Opt. 07	Demodulator (*)		* Demodulation: AM/ FM * Output: Internal speaker, 3.5mm stereo jack wired for mono operation * RBW selection: 10kHz & 100kHz, 3dB bandwidth, Accuracy: 15%
Opt. 08	GPIB Interface		* IEEE 488 bus
Note: 1. (*) Only one option can be selection between Opt. 05, 06, 07 2. All options are factory-installed except opt.02.
OPTIONAL ACCESSORIES
ATA-001		BNC Antenna (An additional ADP-001 is needed for fitting GSP spectrum analyzers)
ATA-002		Near Field Probe (An additional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers)
GAP-801		Preamplifier Preamplifier with 10dB(typical), gain 9kHz ~ 6GHz
GAP-802		Preamplifier Preamplifier with 20dB(typical), gain 9kHz ~ 3GHz
RLB-001		Return Loss Bridge RLB Frequency Range 10MHz ~ 1GHz
GTP-3000		Passive touch Probe Set PR-03: Passive touch probe, SMA(F) ADP-002: Adaptor, SMA(J/F) ~ N(P/M) GTL-303: RF Cable Assembly, SMA(P/M), 600mm
GKT-001		General Kit set ADP-002: adaptor, SMA(J/F) ~ N(P/M) x 2 ATN-100: 10dB attenuator, N(J/F) ~ N(P/M) x 1 GTL-303: RF cable assembly(SMA(P/M),RD316,600mm)x2 GSC-002: Kit box x 1
GKT-002		CATV Kit set ADP-001: adaptor, BNC(J/F) ~ N(P/M) x 2 ADP-101: adaptor, BNC(J/F)75Ω ~ BNC(P/M)50Ωx 2 GTL-304: RF cable assembly(RG223,N(P/M)-N(J/F),300mm)x2 GSC-003: Kit box x 1
GKT-003		RLB Kit set GAK-001: termination 50 , N(P/M) x 1 GAK-002: Cap with chain, N(P/M) x 1 GTL-302: RF cable assembly(RG223,N(P/M),300mm)x2 GSC-004: Kit box x 1
GKT-006		EMI Probe Kit set ANT-01: 6cm Loop, H-Field Probe x 1 ANT-02: 3cm Loop, H-Field Probe x 1 ANT-03 6mm Stub tip, E- Field Probe x 1 PR-03: Touch Passive Probe x 1 ADP-02: N(P/M)~SMA(J/F) Adapter x 1 ADP-01: N(P/M)~BNC(J/F) Adapter x 1 Test Lead: BNC(P/M)~BNC(P/M) RF Cable x 1 Test Lead: SMA(P/M)~SMA(P/M) RF Cable x 1
GRA-404		Rack Adapter Panel Rack Mounting (19", 4U)
GSC-001		Soft Carrying Case
GTL-301		RF Cable RG 223 N(P/M), 1000mm
GTL-401		DC Power Cord DC power cord with DC Jack and lighter plug, Current 5A