Máy phát xung tùy ý Tektronix AFG1062 (60mhz, 2ch)

Hãng sản xuất : Tektronix / Mỹ
Model : AFG1062 
Bảo hành : 12 tháng

Tần số  : 60Mhz
Số kênh : 2
Tốc độ lấy mẫu : 300 MS/s 
Độ phân giải : 14 bit
Biên độ : 1 mVp-p to 10 Vp-p, 50 Ω load
Sóng phát : Since, vuông, răng cưa, xung, nhiễu và tùy ý
Sóng Sin :
    Tần số : 1uHz ~ 60Mhz
    Biên độ phẳng (1Vpp) : ±0.2 dB (< 10Mhz) và ±0.3 dB (>10 MHz )
    Tổng nhiễu hài : < 0.2%
    Nhiễu pha : 1 MHz: < -110 dBc/Hz at 10 kHz offset, 1 Vp-p
Sóng vuông :
    Tần số : 1uHz ~ 30 Mhz
    Rise/fall : <10ns
Sóng răng cưa :
    Tần số : 1uHz ~ 2Mhz
    Độ tuyến tính : < 0.1%
    Tính đối xứng : 0 - 100%
Sóng xung :
    Tần số : 1uHz ~ 30 Mhz
    Độ rộng : <1 MHz, 0.1% to 99.9%
Nhiễu :
    Băng thông : 50 Mhz
Sóng tùy ý :
    Tần số : 1uhz ~ 30 Mhz
    Độ phân giải : 14 bits
    Rise/fall : < 8ns
Điều chế : AM/FM/PM/FSK 
Chế độ đếm tần số
Bộ nhớ : 64 MB bộ nhớ trong và bộ nhớ ngoài dùng USB
Giao tiếp : USB
Nguồn cung cấp : 220-240 VAC, 100-120 VAC, 50/60 Hz
Kích thước : 235 × 110 × 295 mm, 4.7 kg
Phụ kiện : Máy chính, Cáp BNC x 2, USB cáp, đầu nguồn, HDSD, chứng nhận chuẩn.

Pecifications

All specifications apply to all models unless noted otherwise.

Channels

Number of channels

2 

Built-in waveforms

Built-in waveforms

Sine, Square, Pulse, Ramp, Noise, and 45 frequently used arbitrary waveforms

General characteristics

Sine waves


Range

AFG1022	AFG1062
1 μHz to 25 MHz	1 μHz to 60 MHz

Sine wave in burst mode

2 mHz to 25 MHz

2 mHz to 30 MHz

Effective maximum frequency out

25 MHz

60 MHz

Amplitude flatness (1 Vp-p), typical

 

      <10 MHz

±0.2 dB

±0.2 dB

      ≥10 MHz

±0.3 dB

±0.3 dB

Harmonic distortion (1 Vp-p)

 

      ≤10 MHz

< -50 dBc

< -60 dBc

      >10 MHz

< -50 dBc

< -47 dBc

Total harmonic distortion

< 0.2% (10 Hz to 20 kHz, 1 Vp-p)

Spurious (1 Vp-p)

< -45 dBc

Phase noise, typical

1 MHz: < -110 dBc/Hz at 10 kHz offset, 1 Vp-p

Residual clock noise, typical

-57 dBm

Square wave


Range

AFG1022	AFG1062
1 μHz to 12.5 MHz	1 μHz to 30 MHz

Rise/fall time

<12 ns

<10 ns

Jitter (rms), typical

<1 ns

<500 ps

Overshoot

<5%

Ramp wave


Range

AFG1022	AFG1062
1 μHz to 1 MHz	1 μHz to 2 MHz

Linearity, typical

≤ 0.1% of peak output at 10% - 90% of amplitude range, at 1 kHz, 1 V p-p , 50% symmetry

Symmetry

0.0% to 100.0%

Pulse wave


Range

AFG1022	AFG1062
1 μHz to 12.5 MHz	1 μHz to 30 MHz

Pulse width range

40 ns to 999 ks

17 ns to 999 ks

Pulse width resolution

1 ns or 4 digits

Pulse duty

<1 MHz, 0.1% to 99.9% (limitations of pulse duty width apply)
≥1 MHz, 50% fixed	≥1 MHz, 50% fixed

Edge transition time

<12 ns, fixed

<10 ns, fixed

Overshoot, typical

<5%

Jitter (rms), typical

<1 ns

<500 ps

Noise


Noise bandwidth (-3 dB)

AFG1022	AFG1062
25 MHz	50 MHz

Noise type

White Gausian

DC


Range

AFG1022	AFG1062
-5 V to +5 V, 50 Ω load
-10 V to + 10 V, open circuit or high Z load

Arbitrary waveform


Range

AFG1022	AFG1062
1 μHz to 10 MHz	1 μHz to 30 MHz

Arbitrary waveform in burst mode

2 mHz to 10 MHz

2 mHz to 30 MHz

Effective analog bandwidth (-3 dB)

30 MHz

60 MHz

Non-volatile memory

64 MByte

Memory

 

      Length

2 to 8,192

2 to 1 M-point

      Sampling rate

125 MS/s

300 MS/s

Vertical resolution

14 bits

Rise and fall time

< 10 ns

< 8 ns

Jitter (rms), typical

< 6 ns

Frequency


Resolution

AFG1022	AFG1062
1 μHz or 12 digits

Internal reference stability

±1 ppm at 0 - 40 °C

Internal reference aging

±1 ppm per year

Amplitude

Range (50 Ω load)

 


      ≤25 MHz

AFG1022	AFG1062
1 mVp-p to 10 Vp-p	1 mVp-p to 10 Vp-p

      >25 MHz

-	1 mV p-p to 5 V p-p


Range (Open circuit or high Z load)

 

      ≤25 MHz

2 mVp-p to 20 Vp-p

2 mV p-p to 20 V p-p

      >25 MHz

-	2 mV p-p to 10 V p-p

Accuracy

±(1% of setting +1 mVp-p), (1 kHz sine waveform, 0 V offset)

Resolution

1 mVp-p, 1 mVrms or 4 digits

Units

Vp-p, Vrms

Output impedance

50 Ω (typical)

Local impedance setting

Selectable: 50 Ω, 1 Ω to 10.000 kΩ, High Z (adjusts displayed amplitude according to selected load impedance)

Isolation

No floating ground, signal ground connected to chassis ground

Signal output protection

Short-circuit tolerance, main output automatically disabled when over current

DC offset

Range

±(5 Vpk – Amplitudep-p/2), 50 Ω load

±(10 Vpk – Amplitudep-p/2), open circuit or high Z load

Accuracy

±(1% of |setting| + 1 mV + 0.5% of amplitude (Vp-p))

Resolution

1 mV or 4 digits

Modulation

Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022.

The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes.

Amplitude modulation

Carrier waveforms

Sine, square, ramp, arbitrary, except DC and noise

Source

Internal / external

Internal modulating waveforms

Sine, square, ramp, noise, arbitrary

Internal AM frequency

2 mHz to 20 kHz

Depth

0.0% to 100.0%

Frequency modulation

Carrier waveforms

Sine, square, ramp, arbitrary, except DC and noise

Source

Internal / external

Internal modulating waveforms

Sine, square, ramp, noise, arbitrary

Internal modulating frequency

2 mHz to 20 kHz

Frequency deviation

(limited by carrier waveform type)

AFG1022	AFG1062
2 mHz to 12.5 MHz	2 mHz to 30 MHz

Phase modulation

Carrier waveforms

Sine, square, ramp, arbitrary, except DC and noise

Source

Internal / external

Internal modulating waveforms

Sine, square, ramp, noise, arbitrary

Internal PM frequency

2 mHz to 20 kHz

Phase Deviation

0° to 180°

Amplitude shift keying

(AFG1062 only)

Carrier waveforms

Sine, square, ramp, arbitrary, except DC and noise

Source

Internal / external

Internal modulating waveforms

50% duty cycle square

ASK rate

2 mHz to 100 kHz

Frequency shift keying

Carrier waveforms

Sine, square, ramp, arbitrary, except DC and noise

Source

Internal / external

Internal modulating waveforms

50% duty cycle square

FSK rate

2 mHz to 100 kHz

Phase shift keying

(AFG1062 only)

Carrier waveforms

Sine, square, ramp, arbitrary, except DC and noise

Source

Internal / external

Internal modulating waveforms

50% duty cycle square

PSK rate

2 mHz to 100 kHz

Pulse width modulation

(AFG1062 only)

Carrier waveforms

Pulse, ≤1 MHz

Source

Internal / external

Internal modulating waveforms

Sine, square, ramp, arbitrary, except DC and noise

PWM frequency

2 mHz to 20 kHz

Deviation

0.0% to 50.0% of pulse period

Sweeping

Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022.

The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes.

Carrier waveforms

Sine, square, ramp, arbitrary (AFG1062 only)

Minimum start-stop frequency

1 μHz

Maximum start-stop frequency


Sine

AFG1022	AFG1062
25 MHz	60 MHz

Square

12.5 MHz

30 MHz

Ramp

1 MHz

2 MHz

Type

Linear, logarithmic

Direction

Up / down

Sweep time

1 ms to 500 s ± 0.1%

Trigger sources

Internal, external, or manual

Burst

Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022.

The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes.

Waveforms

Sine, square, ramp, pulse, arbitrary except DC and noise

Types

AFG1022: count (1 to 50,000 cycles), infinite, gated

AFG1062: count (1 to 1,000,000 cycles), infinite, gated

Start phase

-360° to +360°

Trigger sources

Internal, external, or manual

Internal trigger interval

(40 ns or (cycles x period) to 500 s) ± 1%

Gate source

External trigger

Frequency counter

Function

Frequency, period, positive pulse width, duty cycle

Frequency range

100 mHz to 200 MHz

Frequency resolution

6 digits

Coupling mode

AC, DC

Voltage Range and Sensitivity, DC coupled (non-modulation signal)

100 mHz to 100 MHz

250 mVp-p to 5 Vp-p (AC + DC)

100 MHz to 200 MHz

450 mVp-p to 3 Vp-p (AC + DC)

Voltage range and sensitivity, AC coupled (non-modulation signal)

1 Hz to 100 MHz

250 mVp-p to 5 Vp-p

100 MHz to 200 MHz

450 mVp-p to 4 Vp-p

Pulse width and duty cycle measure

1 Hz to 10 MHz

Input impedance

1 M Ω in parallel with 100 pF

High frequency noise restraint (HFR)

On / Off (HFR frequency = 500 kHz)

Sensitivity

Low, middle, or high

Trigger level range

-2.5 V to +2.5 V

Auxiliary inputs and outputs

External modulation input

Input frequency range

DC to 20 kHz

Input voltage range

All except FSK: ±1 V full scale, FSK: 3.3 V logic level

Input impedance

12 kΩ (typical)

External trigger input

Level

TTL-compatible

Slope

Rising or falling (selectable)

Pulse Width

>100 ns

External reference clock input

(Shared with Frequency Counter Input)

Impedance

400 Ω, AC coupled

Requested Input voltage swing

100 mVp-p to 5 Vp-p

Locking range

10 MHz ±9 kHz

External reference clock output

Frequency

10 MHz

Impedance

50 Ω, DC coupled

Amplitude

1.6 Vp-p into 50 Ω load

Communication interface

USB

Host and device, USB TMC compliance

Display

Display type

3.95-inch

Display resolution

480 by 320 

Display colors

65,536 

Menu and online help languages

Menu and online help languages

English and Simplified Chinese

Power source

Supply

220-240 VAC, 100-120 VAC, 50/60 Hz, CATⅡ

Consumption

AFG1022: Less than 28 W

AFG1062: Less than 35 W

Fuse

110 V: 250 V, F1AL

220 V: 250 V, F0.5AL

Warm-up time

30 minutes (typical)

Physical characteristics

Dimensions (W, H, D)

230 × 110 × 306 mm (9.0 × 4.4 × 12.1 in)

Weight

Net

3.4 kg (7.5 lbs)

Shipping

4.7 kg (10.3 lbs)

EMC environment and safety

Temperature

Working

0 ℃ to 40 ℃ (32 °F to 104 °F)

Storage

-20 ℃ to 60 ℃ (-4 °F to 144 °F)

Relative humidity (non-condensing)

Operating: ≤ 80%, +0 °C to +40 °C (+32 °F to +104 °F)

Non-operating: 5% to 90%, < +40 °C (+104 °F)

Non-operating: 5% to 80%, ≥ +40 °C (+104 °F) to ≤ +60 °C (+140 °F)

Altitude

Operating: up to 3,000 m (9843 ft.)

Non-operating: up to 12,000 m (39,370 ft)

Cooling method

Fan cooling

EMC compliance

European Union

EN 61326-1 

Australia/NZ

CISPR 11, Class A

Safety compliance

UL 61010-1

 

CAN/CSA-C22.2 No. 61010-1

 

EN 61010-1

 

IEC 61010-1