Máy đo độ dầy lớp phủ từ tính và không từ tính, SANKO-NHẬT BẢN, SWT-7200 II

(Click vào để xem ảnh lớn)

Máy đo độ dầy lớp phủ từ tính và không từ tính, SANKO-NHẬT BẢN, SWT-7200 II

Giá: Liên hệ Lượt xem: 0 Hàng mới

Giá: VND

Chi tiết sản phẩm

THÔNG SỐ KỸ THUẬT:

Interchangeable probes. Multi-functioned type with memory, statistics, data transfer to PC

Probe can be selected to meet optimal application of measurements
Guide-messages of operation procedures on LCD screen.
A large capacity of measurement memory 10,000 points
Measurements by simply calling registered calibrations.
Built-in setting method of high/low limit values and statistical functions
Availability of data transfer to PC by USB connections.

Applications

Coating / lining / plating
Insulating films such as anodic oxide coating (ALMITE)

Electro-magnetic / Eddy current

Substrate: Magnetic metal (iron, steel, etc.),
Non-magnetic metal (aluminum, copper, etc.)
Coating: Non-magnetic coating (painting, plating(excluding nickel), resin, etc.)

Specifications

Measuring range : Depending on optional probes
Display method : Graphic LCD
Calibrations : 2 points calibration type
Calibration memory : 10
Measurement memory : 10,000
Data transfer : USB
Power : Dry battery (R6P 1.5V)×2, Exclusive AC adaptor, Auto-power off
Temperature : 0～40℃(non-condensing)
Weight and dimensions : 72(W)×30(H)×156(D) mm, 200g
Accessories : Carrying case, Exclusive AC adaptor, USB cable, USB driver
Option : For ferrous substrate probe (Fe) For nonferrous substrate probe (NFe)

Lựa chọn các loại đầu dò dưới đây

Exclusive probes for SWT series

	Separate-interchangeable probes available with a main unit.
	Selections of probe for ferrous (electro-magnetic) or non-ferrous ( eddy current) substrate depending on a measuring object.
	Capability of selections probe like high-stable probe to measure minute piece objects or alike depending on applications and a measurement range.

Models	Fe-2.5	NFe-0.6	NFe-2.0
Methods	Magnetic induction type	Eddy current type
Ranges	0～2.50mm	0～600μm	0～2.00mm
Display resolutions	1μm：0～999μm switching to 0.1μm：0～400μm 0.5μm：400～500μm 0.01mm：1.00～2.50mm	1μm：0～600μm switching to 0.1μm：0～400μm 0.5μm：400～500μm	1μm：0～999μm switching to 0.1μm：0～400μm 0.5μm：400～500μm 0.01mm：1.00～2.00mm
Accuracies (on flat face)	0～100μm：±1μm Or ±2% the designated value 101μm～2.50mm：±2%	0～100μm：±1μm Or ±2% the designated value 101μm～600μm：±2%	0～100μm：±1μm Or ±2% the designated value 101μm～2.00mm：±2%
Probes	One point contact constant pressure type, V cut φ13×48mm	One point contact constant pressure type, V cut φ11×48mm	One point contact constant pressure type, V cut φ13×47mm
Probes	Option：V type probe adaptor (3kinds: for φ5 less, φ5～10, φ10～20)
Accessories	Standard thickness, Zero plate for testing (Fe)	Standard thickness, Zero plate for testing (NFe)
Measuring objects	Coating, lining, thermal spray film, plating (except electrolyte nickel plating), etc. on magnetic metal substrates like ferrous, steel, etc.	Insulated films, etc. on non-magnetic substrates like aluminum, copper, etc
Measuring objects		For high stability with thin bars, tubes, minute pieces etc.	For relatively general measuring objects.