Máy hiện sóng tương tự Pintek PS-600 ( 60MHz, 2Channel)

(Click vào để xem ảnh lớn)

Máy hiện sóng tương tự Pintek PS-600 ( 60MHz, 2Channel)

Giá: Liên hệ Lượt xem: 0 Hàng mới

Giá: 14.600.000 VND

Chi tiết sản phẩm

THÔNG SỐ KỸ THUẬT:

Hãng sản xuất : Pintek - Taiwan
Xuất xứ : Taiwan

60MHz DUAL TRACE, DUAL TRIGGER.
VERT SENSITIVITY FROM 1mV/DIV TO 15V/DIV.
SWEEP RATE FROM 10nS/DIV TO 2S/DIV.
HOLD-OFF, X-Y OPERATION.
CE, TUV GS, UL, CUL, IEC1010.

CRT:
Type :	Rectangular with integral graticule.
Display Area :	8 x 10 div ( 1 div = 1 cm )
Accelerating Voltage :	12 kV.

Phosphor :	P31.
VERTICAL AMPLIFIERS ( CH 1 and CH 2 )
Sensitivity :	5 mV / div to 5 V / div ( X1 mode ). 1 mV / div to 5 V / div ( X5 mode ). 1-2-5 sequence, 10 step attenuator. Vernier control provides fully adjustable attenuation between steps.
Accuracy :	± 3 % ( X1 mode ). ± 5 % ( X5 mode ).
Input Resistance:	1 MΩ ± 2 %.
Input Capacitance:	25 pF ± 10 pF.

Frequency Response:	5 mV to 5 V / div ( CAL ):DC to 60 MHz (-3 dB).1 mV / div (CAL): DC to 20 MHz (-3 dB)
Rise Time:	Approximately 5.8 ns.
Operaing Modes:
CH1:	CH 1, single trace.
CH2:	CH 2, single trace.

ALT:	dual trace, alternating.
CHOP:	dual trace, chopped.
ADD:	algebraic sum of CH 1 + CH 2.
Polarity Reversal ( Invert ):	CH 2 only.
Maximum Input Voltage:	400 V dc + ac peak.
HORIZONTAL AMPLIFIER ( Input through channel 1 input )

X-Y mode:	switch selectable using X-Y switch.
CH 1:	X axis.
CH 2:	Y axis.
Sensitivity:	1mv/div to 5v/div
Accuracy:
Y-Axis:	± 3%.
X-Axis:	± 6%.
Input Impedance:	1MΩ ± 2% 25PF
Frequency Response:	DC to 1 MHz typical ( -3 dB ).
X-Y Phase Difference:	Approximately 3° at 50 kHz.
Maximum Input Voltage:	400V dc+ac pack
SWEEP SYSTEM
Sweep Speed:	0.1 μs/div to 2S/div in 1-2-5 sequence, 23 steps. Vernier control porvides fully adjustable sweep time between steps.
Accuracy:	± 3 %.
Sweep Magnification:	10X, ± 10%
Holdoff:	Continuously adjustable from NORM to 5 times normal.
TRIGGERING
Trigger Modes:	AUTO ( free run ) or NORM.
Trigger Source:	CH 1, CH 2, ALT, EXT, LINE.
Maximum External Trigger Voltage:	300 V dc + ac peak
Trigger Coupling:
AC :	30 Hz to 60 MHz
TV-H :	Used for triggering from horizontal sync pulses.
TV-V :	Used for triggering from vertical sync pulses.
Trigger Sensitivity:
Internal:	0.5 division ( 1 division with TV Coupling ).
External:	500 mV.
OTHER SPECIFICATIONS
Calibrating Voltage:	1 kHz ( nominal ) Positive Square Wave, 2.0 V p-p ( ± 3% )
Trace Rotage:	Electrical, front panel adjustable.
Power Requirements:	115/230 VAC ± 10%, 50 / 60 Hz, approximately 40 W.
Dimensions:	324 x 132 x 398 mm ( 12.8 x 5.2 x 15.6" )
Weight:	Approximately 7.8 kg ( 17.2 1bs )
Rated Range of Use:	10° C-35° C, 10-80% R.H.