22 Lý Tự Trọng, Minh Khai, Hồng Bàng, Hải Phòng.
itvc.haiphong@itvc-global.com
Chi tiết sản phẩm
Hãng sản xuất: Fluke
Model: 52120A
Dòng điện ra: 2 A, 20 A, 120 A (100 A dc)
Dòng điện vào: 200 mA, 200 mA, 120 mA (100 mA dc)
Hệ số khuếch đại dòng điện: 10, 100, 1000
Input voltage range: 2 V, 2 V, 1.2 V (1.0 V dc)
Độ dẫn truyền: 1,10,100 Siemens
Tần số: đến 10 kHz
Điện áp ra Max: 4.5 Vrms (6.4 Vpeak)
Đầu ra cách lu, Dòng từ cầu nối đến đất: 600 Vrms, 850 Vpeak, dc to 850 Hz
Điện áp vào: 100 V to 240 V
Công suất tiêu thụ: < 1500 VA
Kích thước: 192 mm x 432 mm x 645 mm
trọng lượng: 25kg
Option:
52120A/COIL3KA: Coil, 25 Turn, 3000 Amp
52120A/COIL6KA: Coil, 50 Turn, 6000 Amp
52120A/COIL12V: Coil 12 V DC Supply
Operating limits |
|
Output ranges |
2 A, 20 A, 120 A (100 A dc) |
Input current range |
200 mA, 200 mA, 120 mA (100 mA dc) |
Current gain |
10, 100, 1000 |
Input voltage range |
2 V, 2 V, 1.2 V (1.0 V dc) |
Transconductance |
1,10,100 Siemens |
Frequency |
To 10 kHz |
Maximum output compliance voltage |
4.5 Vrms (6.4 Vpeak) |
Inductive drive capability: |
1 mH load |
Output isolation, current terminal to earth |
600 Vrms, 850 Vpeak, dc to 850 Hz |
Performance specifications |
|
AC accuracy, closed loop with 6105A |
To 140 ppm |
DC accuracy, standalone |
To 160 ppm |
AC accuracy, standalone |
To 350 ppm |
Phase angle accuracy |
0.006° |
Load dependent phase angle shift |
<0.001° @ 60 Hz |
General specifications |
|
Input line voltage range |
100 V to 240 V with up to ±10 % fluctuations |
Transient overvoltage |
Impulse withstand (overvoltage); Category II of IEC 60364-4-443 |
Frequency |
47 Hz to 63 Hz |
Maximum consumption |
< 1500 VA |
Calibration Documentation |
Report of calibration with data included; 17025 accredited report optional |
Dimensions with feet (H x W x L) |
192 mm x 432 mm x 645 mm |
Dimensions without feet (H x W x L) |
178 mm x 432 mm x 645 mm |
Weight |
25 kg (54 lb.) |
Design standards and compliance |
Designed to EN 61010-1: 2010, CAN/CSA 22.2 No 61010.1-04, ANSI/UL 61010-1:2004, EN 61326-1:2006 CE marked, CSA listed |
Operating temperature |
5 °C to 35 °C |
Calibration temperature range |
16 °C to 30 °C |
Warm up time |
1 hour |
Safe operating max. relative humidity (non-condensing) |
<80 % 5 °C to 31 °C ramping linearly down to 50 % at 35 °C |
Operating altitude |
0 m to 2,500 m |
Shock and vibration |
MIL-PRF-28800F class 3 |
Specification confidence level |
99% |